Reliable Supplier Esp Cement Plant - HMC series pulse cloth bag dust collector – Xintian
Reliable Supplier Esp Cement Plant - HMC series pulse cloth bag dust collector – Xintian Detail:
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc.
When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the dust particles with a large proportion settle into the ash hopper, and the lighter dust depends on the air induction to reach the surface of dust removal filter bag. The filter bag of dust collector generally uses needle felt as the filter carrier, and the filtration accuracy can reach <1um. The dust is blocked on the surface by the filter bag, and the dust gas is purified through the filter bag. With the increasing of time, more and more dust is filtered on the surface of filter bag, so the resistance of the filter bag is gradually increased. In order to make the dust collector work normally, when the resistance rises to a limited range, the electronic pulse controller issues instructions to follow the order. The sequence triggers each control valve to open the pulse valve, and the compressed air in the gas storage bag of dust collector is sprayed into the corresponding filter bag by each injection hole of the injection pipe. The filter bag expands rapidly under the instantaneous reverse action of air flow, which makes the dust attached to the surface of the filter bag fall off and makes the filter bag achieve the most original air permeability filtration effect. The cleared dust falls into the ash hopper and drains out of the body through the ash removal system to complete the whole ash cleaning and filtration process.
Technical Parameters of Equipment Selection:
|
Equipment Model |
HMC-24 |
HMC-32 |
HMC-36 |
HMC-48 |
HMC-64 |
HMC-80 |
|
|
Total Filtration Area m² |
20 |
25 |
30 |
40 |
50 |
64 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
1200-2400 |
1500-3000 |
1800-3600 |
2400-4800 |
3000-6000 |
3840-7680 |
|
|
Quantity of Filter Bag |
24 |
32 |
36 |
48 |
64 |
80 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
4 |
4 |
6 |
6 |
8 |
8 |
|
|
Induced Draft Fan Model |
4-72-2.8A |
4-72-3.2A |
4-72-3.6A |
4-72-3.6A |
4-72-4A |
4-72-4.5A |
|
|
Power of Motor |
1.5kw |
2.20kw |
3kw |
4kw |
5.5kw |
7.5kw |
|
Equipment Model: HMC- 160B Pulse Cloth Bag Dust Collector
Application Field: Dust removal of combined grinder, grooving machine, grinding and cutting machine.
|
Equipment Model |
HMC-96 |
HMC-100 |
HMC-120 |
HMC-160 |
HMC-200 |
HMC-240 |
|
|
Total Filtration Area m² |
77 |
80 |
96 |
128 |
160 |
192 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
4620-9240 |
4800-9600 |
5760-11520 |
7680-15360 |
9600-19200 |
11520-23040 |
|
|
Quantity of Filter Bag |
96 |
100 |
120 |
160 |
200 |
240 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
12 |
10 |
12 |
16 |
20 |
20 |
|
|
Induced Draft Fan Model |
4-72-4.5A |
4-72-4.5A |
4-72-5A |
4-72-5A |
4-68-8C |
4-68-6.3C |
|
|
Power of Motor |
7.5kw |
7.5kw |
11kw |
15kw |
18.5kw |
22kw |
|
Product detail pictures:
Related Product Guide:
Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Reliable Supplier Esp Cement Plant - HMC series pulse cloth bag dust collector – Xintian , The product will supply to all over the world, such as: Italy, Singapore, Puerto Rico, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
By Ada from Russia - 2017.11.11 11:41
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Tyler Larson from Honduras - 2018.11.04 10:32
Related products
-
Online Exporter Bag Filter Dust Collector - P8...
P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to ...
-
China OEM Filter Bag Cages - Fiberglass Needle...
It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, minimal elongation and shrinkage, high strength. And the tapetum fiber bears single fiber, three-dimensional micro-porous structure, high porosity and low resistance to gas filtration. It is a kind of high-speed and highefficiency high-temperature filtering material. It is widely used in high temperature flue gas filtration of industrial kilns such as chemical industry, iron and steel, smelting...
-
8 Year Exporter Centrifugal Dust Collector - A...
-
OEM Factory for Big Bag Filter - High-temperat...
Beauty, dust bag with resistance to high temperature (204 ~ 240 ℃), strong acid, alkali, high filtering speed, low pressure loss, and the characteristics of the folding, good resistance to wear, but is not in the heat resistance to hydrolysis, mainly used in the asphalt mixing station flue gas, steel blast furnace gas, flue gas, carbon black (white carbon black) exhaust, cement kiln kiln kiln head, at high temperature furnace flue gas, Firebrick furnace smoke and coking smoke and other workin...
-
Popular Design for Collecting Plate Esp - Dust...
Product Description For the collection and treatment of floating and suspended dust with a large amount of dust, an automatic discharge valve is added under the ash hopper, which has the advantages of stability and reliability, small size, good sealing performance, convenient maintenance, and long service life. For the collection and treatment of floating and suspended dust with a large amount of dust, its speed is 24r/min, and discharge valves of different powers can be selected according to...
-
Factory wholesale Electrostatic Precipitator An...
Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...