1. Under normal operation, because there may be a risk of fire caused by sparks in the interior of the dust collector, it is necessary to avoid bringing cigarette butts, lighters and other flares or combustibles into the surrounding equipment during operation.
2. After the installation of the equipment, the equipment should be checked to see whether there is air leakage. If there is air leakage, it should be solved in time to avoid affecting the dust removal efficiency.
3. After the installation of the equipment, first check whether the connection of the line is correct, and add lubricating oil to each part of the equipment, simply test whether each part of the parts can operate normally, to prevent damage to the parts.
4. The filter cartridge in the pulse cartridge dust collector belongs to the vulnerable parts. It should be checked regularly.
In the normal operation of pulse filter cartridge dust collector, first of all, the particles containing dust will have the upper air inlet directly into the bottom of the equipment for dust preparation, and then the airflow will directly enter the dust chamber of the upper box from the bottom, and the fine dust particles will be absorbed on the surface of the filter material again. The filtered clean gas passes through the filter cylinder and enters the clean air chamber of the upper box body and is directly discharged into the atmosphere by the exhaust port.
Post time: Jul-13-2021