1. In specific manufacturing, in order to better reduce the smoke and dust caused by the natural ventilation of the shredder shell, when the raw materials are dry, they are often sprayed at the entrance and exit, which will aggravate the blockage of the dust bag and the vibrating feeder.
2. The dust removal point setting is not very effective. Regardless of whether the equipment is on or off, most of the dust removal of the belt conveyor below is not affected. Therefore, since the start of the crusher, the generator set has not been in operation, and the next set of belt conveyors has been in smoke and dust.
3. Spiral conveyors and grid wheels transport woodworking dust collector equipment to collect smoke and dust, which increases energy consumption and the amount of maintenance labor for industrial equipment. It is often necessary to remove the grid belt conveyor. From a long-term perspective, the flange of the belt conveyor is naturally ventilated, and the silo is naturally ventilated.
4. The machinery and equipment do not continuously remove ash, so natural ventilation is a difficult problem that cannot be ignored when the woodworking dust collector is in normal operation. The total filtering area of the machinery and equipment is too small, the actual effect of specific natural ventilation is not enough, and the dust jacket and inner cavity of the grinder cannot cause slight negative pressure, resulting in excessive smoke and dust in the surrounding environment.
I have shared with you the question about the woodworking dust collector. Let me know it briefly. If you have any questions, please contact us.
Post time: Sep-26-2021