With the continuous development of science and technology, more and more industrial dust collectors are produced, among which filter cartridge dust collectors are widely used in food, cement, chemical, metal processing, special powder and other industrial fields. The filter cartridge dust collector is easy to break after being used for a long time, so the maintenance and maintenance of the filter cartridge dust collector is particularly important.
We need to do the following:
(1) Determine the amount of dust collected by the dedusting equipment and determine the ash discharge cycle according to the amount of dust collected by the dedusting system.
(2) Determine the drainage cycle according to the water accumulation in the air bag of the air-water separator in the compressed air system.
(3) Always check whether the pulse cleaning system of the dust collector is normally blowing. If it is not normal, focus on checking whether the pulse valve diaphragm and solenoid valve are malfunctioning or damaged, and should be repaired or replaced in time.
(4) Regularly check whether the operation of the equipment is normal according to the fluctuation and fluctuation of the operating resistance of the equipment.
(5) Regularly check the use of wearing parts according to the list of wearing parts and replace them in time.
(6) Regularly add lubricating oil to the parts that need to be lubricated on the equipment. The cycloidal pinwheel reducer should replace the 2# sodium-based grease in the gearbox every six months, and the bearing lubrication points should be replenished with 2# lithium-based grease once a week.
(7) Regularly check whether the differential pressure transmitter has ash blocking, and clean it up in time.
It is the maintenance and maintenance of industrial dust collectors, I hope to help you.
Post time: Apr-19-2022