Cyclone Dust Collector

Ceramic multi-tube dust collector is a dust removal equipment composed of several parallel ceramic cyclone dust collector units (also known as ceramic cyclone). It can be composed of general ceramic cyclone dust collector unit or DC cyclone dust collector unit, these units are organically combined in a shell, with a total intake pipe, exhaust pipe and ash hopper. Ash removal of ash hopper can have many forms of automatic ash removal, because this equipment is composed of ceramic cyclone pipe, which is more wear-resistant than cast iron pipe, and the surface is smoother, with acid and alkali resistance, so it can also be wet dust removal.
Application Scope and Advantages
It is suitable for dust control of various types and combustion modes of industrial boilers and thermal power station boilers. Such as chain furnace, reciprocating furnace, boiling furnace, coal throwing furnace, pulverized coal furnace, cyclone furnace, fluidized bed furnace and so on. For other industrial dust, the dust collector can also be used to treat, but also to use the dust collector for cement and other practical value of dust recovery.
The main advantages of the cyclone are as follows.

Cyclone dust collector has no moving parts inside, easy maintenance.Manufacture, management is very convenient;Small size, simple structure and cheap price when dealing with the same air volume;When used as a pre-dust collector, it can be installed vertically and is convenient to use.When dealing with large air volume, it is easy to use multiple parallel units, and the efficiency resistance is not affected.Can withstand high temperature of 4O ℃, such as the use of special high temperature resistant materials, but also can withstand higher temperature.
Dust remover with wear-resistant lining can be used to purify high abrasive powder.Raw smoke;Can dry cleaning, is conducive to the recovery of valuable dust.
Cyclone dust collector is a type of dust removal device.The dust removal mechanism is to make the dust-containing airflow rotate, with the help of centrifugal force to separate the dust particles from the airflow and capture in the wall, and then with the help of gravity to make the dust particles fall into the dust hopper.Each part of the cyclone has a certain size ratio, and the change of each ratio can affect the efficiency and pressure loss of the cyclone, among which the diameter of the cyclone, the size of the air inlet and the diameter of the exhaust pipe are the main influencing factors.When using, it should be noted that when exceeding a certain limit, favorable factors can also be turned into unfavorable factors.In addition, some factors are beneficial to improve the efficiency of dust removal, but will increase the pressure loss, so the adjustment of all factors must be taken into account.