Factory Cheap Hot Electrostatic Precipitators In Exhaust Systems - High Temperature Baghouse Pulse Jet Dust Collector / Bag Filter / Baghouse/ Dust Remove System – Xintian
Factory Cheap Hot Electrostatic Precipitators In Exhaust Systems - High Temperature Baghouse Pulse Jet Dust Collector / Bag Filter / Baghouse/ Dust Remove System – Xintian Detail:
Product Description
Dust collector is a system for filtering dust in flue gas/gas. Mainly used for the purification and recovery of dusty gas. The shell of the air pulse jet bag filter is an outdoor type, consisting of a shell, a chamber, an ash hopper, a discharge system, an injection system and an automatic control system. According to different combinations, there are many different specifications, air filter room and indoor air filter bag. There are four series of bags: 32, 64, 96, 128, with a total of 33 full series specifications; the filter bag parameters are 130mm in diameter and 2500mm in length; this series of dust collectors are operated under negative pressure, and the dust removal efficiency can reach more than 99.9%. After purification The dust emission concentration of the gas is 10-50mg/Nm³.
Technical Parameters of Equipment Selection:
Application
Packing & Shipping
Product detail pictures:
Related Product Guide:
While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Factory Cheap Hot Electrostatic Precipitators In Exhaust Systems - High Temperature Baghouse Pulse Jet Dust Collector / Bag Filter / Baghouse/ Dust Remove System – Xintian , The product will supply to all over the world, such as: Johor, Czech republic, Libya, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
By Rosemary from Leicester - 2018.09.12 17:18
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Gwendolyn from Colombia - 2017.07.28 15:46
Related products
-
Popular Design for Collecting Plate Esp - Desu...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
PriceList for Industrial Dust Collector System ...
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc. When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the d...
-
Manufacturer for Static Precipitator - Cyclone...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...
-
Ordinary Discount Bag House Dust - Acrylic Med...
The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement Model No. And Specification Nominal Diameter Number of diaphragm Intake Port Size Air Outlet Conn ection Form Weight (kg) Metric System mm British System...
-
OEM manufacturer Industrial Dust Extraction - ...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Special Price for Baghouse Dust - Acrylic Medi...
The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement Model No. And Specification Nominal Diameter Number of diaphragm Intake Port Size Air Outlet Conn ection Form Weight (kg) Metric System mm British System...